Up to 1500 sq ft $345
1501-2500 sq ft $395
2501-3000 sq ft $435
3001-4000 sq ft $485
4001-5000 sq ft $575
5001-6000 sq ft $685
6001-9999 sq ft $0.20 per sq ft
+10000 sq ft $0.25 per sq ft
Up to 1000 sq ft. $305
1001-2000 sq ft $340
2001-3000 sq ft $375
3001-4000 sq ft $415
+4000 sq ft. $0.15 per sq ft
Wind Mitigation $100
Four Point $125
Wind Mit/4 Point
**Special wind mit/ 4 point combo rate for State Farm customers
Call or email for quote
Siding: Look for dents or buckling.
Foundations: Look for cracks or water seepage.
Exterior Brick: Look for cracked bricks or mortar pulling away from bricks.
Insulation: Look for condition, adequate rating for climate (the higher the “R” value, the more effective the insulation is.)
Doors and Windows: Look for loose or tight fits, condition of locks, and condition of weather stripping.
Roof: Look for age, condition of flashing, pooling water, buckled shingles, or loose gutters and downspouts.
Ceilings, walls and moldings: Look for loose pieces and drywall separation.
Porch/Deck: Loose railings or step rot.
Electrical: Look for condition of fuse box/circuit breakers, number of outlets in each room.
Plumbing: Look for poor water pressure, banging pipes, rust pots or corrosion that indicate leaks, sufficient insulation.
Water heater: Look for age, size adequate for the house, speed of recovery, energy rating.
Furnace/Air Conditioning: Look for age & energy rating. Furnaces are rated by annual fuel utilization efficiency; the higher the rating, the lower your fuel costs.
Garage: Look for exterior in good repair and condition of floors – cracks, stains etc.; condition of door mechanism.
Attic: Look for adequate ventilation & insulation, water leaks from roof.
Driveway/Sidewalk: Look for cracks, heaving pavement, crumbling near edges, and stains.
Septic Tanks (if applicable): Adequate absorption field capacity for the percolation rate in the specific municipality and the size of your family.